Close

Change Your Region

If the region in the support menu is incorrect, please select the correct region below so we can provide appropriate contact information. Thanks!

Select a Region

fusion tv mounts
WHAT WE KEPT

Everything, including the 4 Cs:

ControlZone Leveling

Allows post-installation fine-tuning of height and leveling.

Centerless Shift

Provides generous post-installation lateral shift for perfect positioning

Centris Tilt

Uses the center of gravity to balance the screen while maintaining a low profile (tilt mounts only).

ClickConnect

Makes an audible click when the mount is safely engaged with the display.


The 4 Cs of Fusion
Watch the development team demonstrate the 4 Cs of Fusion in the original design - all of which are still included in the new mounts.

Watch Video
WHAT WE ADDED

Super Stability

Set screws keep the mount rigid and stable throughout the life of the installation. Engaging the set screws also ensures secure, precise positioning throughout the life of the installation.

Nesting Spacers

Exclusive nesting spacers can be stacked to achieve any depth, providing a simple, universal hardware solution for mounting displays.

Faster Installation

Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall. The mount can then be hung and the bolts tightened down to secure the install.

Quick Store Cords

New, magnetized ClickConnect makes it easy to store and access pull cords. Once the display is clicked into place simply snap the magnet anywhere onto the interface to hide the cords from view.

Improved Cable Management

Cables can be routed behind the poles without removing end caps.

Enhanced Security

What used to be a separate piece is now integrated into the design to make safeguarding displays easier.

Improved Packaging
We didn't stop with the mount either. Chief's engineers improved the overall experience, including the packaging. We made the box easier to open with less waste to throw away. We also included an interface hardware box that can be hung from the mount rails so you don't lose any pieces if there is a time gap between hanging the mount and hanging the display.

New Fusion vs. Old Fusion
Watch this side-by-side comparison video to see how the new Fusion upgrades make installation even easier.

Watch Video
Mount Cross Reference
Fixed MountsOldNewTilt Mounts OldNew
MSAU MSA1U* MTAU MTA1U*
MSMU MSM1U* MTMU MTM1U*
LSAU LSA1U MTMPU MTMP1U
LSMU LSM1U LTAU LTA1U
XSMU XSM1U LTMU LTM1U
LTMPU MTMP1U*
XTMU XTM1U

*Compatible with dual stud mounting only. Order the FCA1S to accommodate single stud mounting.
**FHB5038 VESA® adapter required for compatibility with 800-1000 mm vertical patterns.


Fusion Cross Reference Brochure
Old New Compatibility
Lower Shelves FCA500 FCA800 Above/Below Component Shelf Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCS100 FCA802 Lower Component Shelf 18" (457 mm)
FCA812 Lower Component Shelf for XL Displays
FVS100 FCA800 Above/Below Shelf 8" (203 mm)
FVS150 FCA801 Above/Below Shelf 14" (356 mm)
Upper Shelves FCA501 FCA801 Above/Below Shelf 14" (356 mm) Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCA502 FCA800 Above/Below Shelf 8" (203 mm)
FCA503 FCA801 Above/Below Component Shelf
FVS200 FCA800 Above/Below Shelf 8" (203 mm)
FVS250 FCA801 Above/Below Shelf 14" (356 mm)
FVS251 FCA801 Above/Below Shelf 14" (356 mm)
FCA810 Above/Below Shelf for XL Displays, 8" (203 mm)
FCA811 Lower Shelf for XL Displays, 14" (356 mm)
Center Shelves FVS300 FCA820 Center Camera Shelf, 8" (203 mm) All Fusion Series Mounts Mounts
FVS350 FCA821 Center Camera Shelf, 14" (356 mm)
Speaker Adapters FCA350 FCA830 Center Channel Speaker Adapter Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCA535 FCA831 Side Speaker Adapter
FCC100 FCA830 Center Channel Speaker Adapter
FLR100 FCA831 Side Speaker Adapter
FCA840 Center Channel Speaker Adapter for XL Displays
FCA841 Side Speaker Adapter for XL Displays
Side Covers FCA106 Decorative Side Cover Accessory* Fusion Fixed & Tilt Mounts
Single Stud Adapter FCA1S Single Stud Adapter Medium Fusion Fixed & Tilt
VESA® FHB5038 VESA® Adapter for 800–1000 mm vertical patterns Medium Fusion Fixed & Tilt
CPU Adapters FCA100 FCA110 Cat5/Surge/CPU Adapter Fusion Fixed & Tilt Mounts
FCA102 FCA112 Surge CPU/Media Player Adapter All Fusion Wall Mounts
FCA103 FCA113 CPU Extender Adapter Fusion Fixed & Tilt Mounts

*Compatible with displays over 24" tall.