Close

Change Your Region

If the region in the support menu is incorrect, please select the correct region below so we can provide appropriate contact information. Thanks!

Select a Region

MountFinder™

Loading...

Flat Panel Projector

horizontal   x   vertical

Find Mounts

Don't see your model #?

Recently Viewed

Tools

  • Build in MountBuilder
  • Find Throw Distance
  • Get Chief Certified
  • Become a Dealer
SL236
SL236
SL236SP

SMART-LIFT Automated Projector Mount (For Suspended Ceiling installations, 120V)

The SL236 provides Extended Travel with exceptionally smooth and quiet movement and is a great option for suspended ceilings in homes and corporate offices.

  • Must order SLB interface bracket separately

  • Use Chief's MountFinder to determine which model number matches your specific projector

Note:To ensure this mount works with your equipment check the "Compatibility" tab below.


  • Overview
  • Specifications
  • Downloads
  • Accessories
  • FAQ
  • Compatibility
 

Color

Certifications

Videos

Automated Projector Lifts

Features

  • Two internal outlets, one is switched on 110V units
  • Fits most installation requirements, needing only 11" of clearance above the ceiling
  • Easily accommodates multiple control options
  • Extended Downward Travel up to 36" with 3 stopping positions
  • UL Listed
  • For suspended ceiling installations

Color

Certifications

Videos

Automated Projector Lifts

Specifications

Adjustments: Roll: 2°
Pitch: 15°
Yaw: 10°
Ceiling Closure: 23.9" x 23.9" ( 607 x 607 mm)
Ceiling Opening: 25.5" x 28.5" x 11.1" (648 x 724 x 282 mm)
Certifications: FCC Approved, UL Listed
Color: White
Extension: 36.0"
Max Equip Size (H X W X D): 9.3" x 20.5" x 22.8" (235 x 521 x 578 mm)
Overall Dimensions (H x W x D): 25.1" x 28.3" x 12.3" (638 x 719 x 311 mm)
Power Requirements: 100-125 VAC, 60 Hz, 1.5 A
Shipping Weight: 150.00
Weight Capacity: 35 lbs (15.9 kg)

Smart Lift

SMA
SMA
Smart-Lift Accessories
ASP401
ASP401
Individual Control System

Frequently Asked Questions


Q: Can I attach a ceiling tile to the bottom of the SL236SP?
A: Yes! The bottom pan of the SL236SP is recessed specifically to hold a ceiling tile, including grid pieces if necessary.

Q: Is the SL236 plenum rated?
A: Yes. The SL236 is in compliance with the National Electrical Code requirements outlined in NEC Article 300.22 C when installed in accordance with Chief's instructions for plenum rated installations.

Q: How do I mount my projector to the lift?
A: One SLB bracket is required to attach it to the lift. The SLB bracket is a separate part number and is used only for Chief lifts. You order the same suffix as the RPA but use an SLB prefix.

Q: How do I adjust the "show" position?
A: Simply adjust the limit switch located in the outside bottom corner of the lift with a screwdriver. Adjusts within travel range of 4" to 36".

Q: How do I service my projector?
A: Extend the lift to the service position. The center cradle removes for easy projector access without losing registration.

Q: What do I need to control the lift with AMX/Crestron type systems?
A: Provide a minimum of two dry contacts to control the unit. One dedicated for extend. One dedicated for retract. A third may be added for the service position.

Q: Can I wire more than one control device?
A: Yes, you can piggyback systems as long as you are not using latching switches.

Q: Can I control another device, such as a screen, by using the lift's low-voltage controller?
A: Yes, Chief's controller provides two dry latching contacts to control another device.

Q: What if my projector needs time to cool down before the lift closes?
A: If the projector has a 5V-30V trigger, Chief's lift can be wired to sense the trigger and extends/retracts with the ON/OFF function of the projector.

Q: Does the SL236 fit inside a 2' x 2' suspended ceiling?
A: The SL236 is slightly larger than the 2' x 2' ceiling tile opening. Some modification of the ceiling track will be necessary to install the lift.

Compatibility

If you don't know if this mount is compatible with your equipment use the MountFinder Compatibility Check below.

MountFinder Compatibility Check

Select Brand:

Loading...

Products Compatible with SL236SP

  • Select a brand from the drop-down on the left.